30
Installation - for contractors
instAllAtion
7.
Safety
Only a qualified contractor should carry out installation,
commissioning, maintenance and repair of the appliance.
7.1
General safety instructions
We guarantee trouble-free function and operational relia-
bility only if original accessories and spare parts intended
for the appliance are used.
!
Material losses
Observe the max. permissible inlet temperature.
Higher temperatures may damage the appliance.
you
can limit the inlet temperature by means of a central
thermostatic valve
.
!
Material losses
Only operate the appliance with non-pressurised
taps.
7.2
Instructions, standards and regulations
note
Observe all applicable national and regional regula
-
tions and instructions.
The specific electrical resistance of the water must not fall
below that stated on the type plate. In a linked water net-
work, factor in the lowest electrical resistance of the water
(see chapter "Specification / Data table").
Your water sup-
ply utility will advise you of the specific electrical water
resistance or conductivity.
8.
Appliance description
8.1
Standard delivery
The following are delivered with the appliance:
º
Sieve inside the cold water inlet
º
Special aerator "SR"
º
Company logo for oversink installation