AEG 10714, Instructions For Use Manual

Page: 20 / 68

www.aeg-automotive.com
20
Disposal
The packaging consists of non-contam-
inating materials that you can dispose
of at your local recycling point.
Do not throw electrical appliances
in with domestic waste!
In accordance with European Directive
2012/19/EC for waste electrical and
electronic equipment (WEEE) and con -
version to national law, used electrical
appliances must be collected separately
and taken to a recycling point. For ways
to dispose of old electrical appliances
please contact your community or city
administration.
Illustrations may vary slightly from the
product itself. We reserve the right to
modify the product in accordance with
technical advances. Decoration not
included.
Changing the fuses
A fuse inside the car plug safeguards
the device. This will respond in the
event of a short circuit or voltage peaks
and must then be replaced.
Attention!
Do not use higher rated fuses. The elec-
tronics may otherwise be damaged.
1. unscrew the retaining pin (1) with
the fuse cover (2) from the car plug
(4).
2. Insert a new micro-fuse (3) of the
same rating (see Technical Data).
3. Replace the retaining pin (1) with
the fuse cover (2) in the car plug (4).
Service
Should you have any questions regard-
ing commissioning or operating in spite
of studying these operating instruc-
tions, or if a problem should occur
against all expectations, please get in
contact with your specialist supplier.
1
2
4
3