Make sure that the water inlet hose, the drain hose and the mains cable are not kinked or
squashed, when you insert the appliance.
Adjust the level of the appliance
Make sure that the appliance is level to close and
seal the door correctly. If the level of the appli
-
ance is correct, the door does not catch on the
sides of the cabinet. Loosen or tighten the ad
-
justable feet until the appliance is level.
Adhesive steam protection foil
Fit the steam protection on the front part of the
worktop along the entire width.
Fixing to the adjacent units
WARNING!
Use the supplied brackets to attach the appliance under the worktop or to the adjacent
units, to prevent injury or damage.
1. Fit the supplied angular brackets in the slots on the top of the appliance.
600 mm
28
Installation
