Unmanned Aircraft System
Professional
·
Advanced
- 49 -
Click [Auto Fly], and the UAV will automatically fly along the preset air route; the aircraft will hover after reaching
the last waypoint.
2) Fly
to
Select the waypoint you want to fly to in the Flying Mission Editor (the color of the selected waypoint is green);
then click [Fly to] on the toolbar, and the UAV will fly to this waypoint; after reaching this waypoint, the aircraft
will hover.
Only one target waypoint can be added every time.
3) Edit Flying Mission in the Air
You can continue to edit the flying mission after the UAV enters the hover state. The following operations can be
realized:
a. Continue to edit the flying mission; after clicking [Edit], you can continue to add waypoints and edit waypoint
information; click [End Edit] after editing is completed (at this moment, it is not needed to clear the flying mission;
you can directly upload the current mission to overwrite the existing mission in the UAV). Click [Download] to
ensure that the mission is correct and then execute the action of [Auto Fly].
b. The action of [Fly to] can be executed, as shown in Step 2 (at this moment, missions saved in the UAV still exist).
c. Click [Clear] to clear the flying missions in the UAV and the content of missions shown on the map; at this
moment, if [Auto Fly] is clicked, the UAV will stay in the hover state.
Before the UAV executes the “Auto Fly” command, please first download the mission to verify if the flying
mission uploaded to the UAV is correct.
Go Home
If [Go Home] is clicked during flight or after the UAV enters the hover state, the UAV will automatically return and
hover over the take-off position.
The altitude of the homeward course is the altitude of the last waypoint.
Auto Landing
Click [Auto Landing] after the UAV returns, and the UAV will automatically land to the take-off position.
1) There might be minor difference between the landing position and the take-off position.
2) To avoid unpredictable consequences, please do not randomly click “Auto Landing” in the course of flight.
3) To close the ground station, please first shut it down normally and then turn off the main power switch.
One-key Auto Fly
Before take-off, please make sure all requirements for one-key auto fly are satisfied (the throttle is at the lowest
position; the manual/auto fly switch is turned to the auto mode; at least one waypoint is uploaded). Please see
the section of “Precautions”. One-key auto fly can be executed only when all requirements are satisfied.
Place the UAV on a horizontal surface (do not place it on a sloped ground for take-off). Only after adding
waypoints to maps in the ground station software, uploading waypoints and downloading waypoints for
verification will the “One-key Auto Fly” button light up and become effective. Click the “One-key Auto Fly”
button on the toolbar; the UAV will finish the entire flying mission, including starting the UAV, auto take-off,
routed flight, going home and landing.
Notice!
1) Click the “One-key Auto Fly” button on the toolbar only after the requirements for one-key auto fly are
satisfied. Otherwise, the UAV will not execute the command.
2) In order to avoid unnecessary troubles, the UAV should be placed on a horizontal surface for take-off.
3) Always observe the state of the UAV during its landing so that the UAV can be controlled manually in a
Summary of Contents for F100A
Page 4: ......
