manualshive.com logo in svg

AE B44.1, Assembly Manual

Share
Download
AE B44.1 Assembly Manual Download Page 22

22

:: Body, Wheels, Tires Install - Step 3

:: Body, Wheels, Tires Install - Step 4

:: Body, Wheels, Tires Install - Step 5

Punisher 

body by 

JConcepts

x2

x2

x2

9718

Rear 

bumper

7673

4-40 x 5/16”

fhcs

7673

4-40 x 5/16”

fhcs

6472

nylon nut

1736

FT body 

clips, blue

1736

FT body 

clips, blue

9729

Wing 

shims

9772

High downforce 

wing, 6.5”

Painting Tips:

Body : 

Your B44.1 FT comes with a clear polycarbonate 

body. You will need to prep the body before you can 

paint it.  Wash the inside thoroughly with warm water 

and liquid detergent. Dry the body using a clean, soft, 

lint-free cloth.  Use the supplied window masks to 

cover the windows from the INSIDE of the body (RC 

cars get painted from the inside).  

Using high quality masking tape, apply tape to the 

inside of the body to create a design. Spray (either 

rattle can or airbrush) the paint to the inside of the 

body (prefferably dark colors first, lighter colors last).  

NOTE: use ONLY paint that is recommended for use 

with (polycarbonate) plastics.  If you don’t, you can

destroy the plastic body!!!!).

After painting, cut the body along the trim lines. Make 

sure to drill or use a body reamer to make the holes 

for the body mounts and antenna!

Use the screw 

for the servo 

mount for the 

opposite side!

!

Summary of Contents for B44.1







































Reviews:

No comments

Brands by name

Popular brands

Load more brands