Safety Warnings
Page viii
September 2004
On the test set, the symbol with a "lightning flash arrow"
alerts you to the presence of an uninsulated voltage with
enough magnitude to produce an electric shock.
Whenever there is current in the load, a flashing warning
logo will appear, along with a warning message and an
audible warning tone.
High Voltage Safety Precautions
The DWR-10 test set and any transformer to which it is
connected are possible sources of high-voltage electrical
energy.
Anyone using the test set must take all practical safety
precautions to prevent contact with energized parts of the
equipment and related circuits.
•
Never connect the test set to energized equipment.
•
Do not use the test set in an explosive atmosphere.
•
Stand clear of all parts of the high-voltage circuit,
including all connections, unless the test set is de-
energized and all parts of the test circuit are
grounded.
•
Keep other people away from test activities with
suitable barricades or warnings.
•
Treat all terminals of high-voltage power equipment
as potential electric shock hazards. Voltages may be
induced at these terminals because of proximity to
energized high-voltage lines or equipment.
•
Always disconnect test leads from the power
equipment before disconnecting them at the test set.
The ground connection must be the first made and the
last removed.
All manuals and user guides at all-guides.com