ADWA AD331 User Manual Download Page 2

Dear Customer,

Thank you for choosing an Adwa product.
Please read carefully this manual before starting operations.
This instrument is in compliance with the EMC Directive 89/
336/EEC and Low Voltage Directive 73/23/EEC for electrical
equipments.
For additional technical information, please e-mail us at
[email protected].

WARRANTY

Adwa warrants this product to be free of defects in material
and workmanship as stated in the operating manual. If repair
or adjustment is necessary and has not  been the result of
abuse, misuse or improper handling  within the warranty pe-
riod, please contact your dealer or the nearest Adwa Office for
the RGA (Return  Goods  Authorization) number  to put on the
outside of your  package. Warranted service will be made  with-
out charge. The meter is warranted for a period of 3 years,
while probes are warranted for 6 months.
 The warranty pe-
riod commences from the original date of sale. Warranty is
only valid when the product is used under normal conditions
and  in accordance with the instruction manual. The warranty
is void if the instrument is repaired or serviced by  unautho-
rized  personnel, not used in accordance to the instructions,
or  if  non-Adwa accessories such as buffer solutions, probes,
etc. are used in  conjunction with the meter. Adwa will not be
held  responsible for any accident whether directly or indi-
rectly, caused by the use of this instrument.

39

PROBES AND SOLUTIONS

AD3005D/1

Conductivity probe with built-in tem-
perature sensor, DIN connector and 1 m
cable

AD6020B

1413 µS/cm standard solution, 20 ml sa-
chet, 25 pcs

AD6020-100 1413 µS/cm standard solution, 100 ml

bottle

AD6021-100 12.88 mS/cm standard solution, 100 ml

bottle

AD6022-100 111.8 mS/cm standard solution, 100 ml

bottle

AD6031-100 800 ppm (mg/l) standard solution, 100

ml bottle

AD6032-100 6.44 ppt (g/l) standard solution, 100 ml

bottle

AD6033-100 40 ppt (g/l) / 80.0 mS/cm standard solu-

tion, 100 ml bottle

AD6040B

1500 ppm (mg/l) standard solution, 20
ml sachet, 25 pcs

AD9551           Serial communication cable

Summary of Contents for AD331





















Reviews: