ADWA AD 310 User Manual Download Page 2

Dear Customer,
Thank you for choosing an Adwa product. Please read carefully
this manual before starting operations.

 

This instrument is in

compliance with the EMC directive 2004/108/EC and its
standards, and Low Voltage Directive 2006/95/EC and its
standards for electrical equipments.
For additional technical information, please e-mail us at

[email protected]

.

WARRANTY

Adwa warrants this product to be free of defects in material
and workmanship as stated in the operating manual. If repair
or adjustment is necessary and has not been the result of
abuse, misuse or improper handling within the warranty
period, please contact your dealer or nearest Adwa Office for
the RGA (Return Goods Authorization) number to put on the
outside of your package. Warranted service will be made without
charge. 

The meter is warranted for a period of three years,

while probes are warranted for six months.

 The warranty

period commences from the original date of sale. Warranty is
only valid when the product is used under normal conditions
and in accordance with the instruction manual. The warranty is
void if the instrument is repaired or serviced by unauthorized
personnel, not used in accordance to the instructions, or if
non-Adwa accessories such as buffer solutions, probes, etc.
are used in conjunction with the meter. Adwa will not be held
responsible for any accident whether directly or indirectly,
caused by the use of this instrument.

27

PROBES AND SOLUTIONS

AD76309

Conductivity probe with built-in temperature
sensor, DIN connector, 1 m cable

AD70031P

1413 

μ

S/cm EC standard solution, 20 ml

sachet, 25 pcs.

AD70030P

12.88 mS/cm EC standard solution, 20 ml
sachet, 25 pcs.

AD70032P

1382 ppm TDS standard solution, 20 ml
sachet, 25 pcs.

AD7030

 

12.88 mS/cm EC standard solution, 230 ml

AD7031

1413

 

μ

S/cm EC

 

standard

 

solution,

 

230 ml

AD7032

1382 ppm TDS standard solution, 230 ml

AD7033

 84 

μ

S/cm EC standard solution, 230 ml

AD7039

5000 

μ

S/cm EC standard solution, 230 ml

AD7034

80.00 mS/cm EC standard solution, 230

ml

AD7035

111.80 mS/cm EC standard solution, 230

ml

Summary of Contents for AD 310















Reviews: