3
Introduction ........................................................... 4
Technical Data ..................................................... 6
Front and Rear Panels .......................................... 8
Operational Guide ................................................10
Autoranging .........................................................13
Temperature Compensation ..................................14
EC Calibration .....................................................16
Temperature Adjustment ......................................21
Setup ...................................................................22
Good Laboratory Practice ....................................25
Log-on-demand ....................................................29
Hold ....................................................................33
Probe Maintenance ..............................................34
Probes and Solutions ............................................35
TABLE OF CONTENTS
34
PROBE MAINTENANCE
After measurements, rinse the probe with clean water.
If a more thorough cleaning is required, remove the probe
sleeve and clean the probe with a cloth or a non-abra-
sive detergent.
Make sure to reinsert the sleeve onto the probe properly
and in the right direction.
After cleaning the probe, recalibrate the instrument.
