Installation
Before starting installation/connection, make sure that the power cable is not connected to the main power supply.
Refer to the “Precautions for installation” section before starting installation/connection. (
☞
page 13)
Step 1
Install the mounting bracket.
The figure shows an example of the camera mounted on
a ceiling with a bracket.
When waterproofing, use waterproof material to fill in gaps
and holes between the attachment pipe and the mount
bracket.
①
Prepare a ceiling mount bracket.
②
Fix the attachment pipe to the bracket.
③
Fill the gap between the bracket and attachment pipe
with waterproof material such as silicon clay.
Attachment pipe
Waterproof material
④
Pass the cables from the housing base through the
mount bracket (custom-made)
⑤
Connect the cables from the housing base with the
cables from the ceiling or wall. Refer to page 26 for
how to connect the cables.
Step 2
Fix a bracket to the installation surface on the ceiling or
wall by using appropriate bolts, nuts or the like (not sup-
plied).
Step 3
Insert the SD memory card into the SD memory card slot.
Refer to page 18 for how to insert the SD memory card.
Mount bracket
(custom-made)
(fl
58)
(60 mm {2-3/8 inches})
25 mm {31/32 inches}
85 mm {3-11/32 inches}
RP 1-1/2, 11 crest,
deep 30 MAX
(parallel pipe thread)
R 1-1/2, 11crest, deep 30 MAX
(taper pipe thread)
22
