B-5360 Hardware and Install Manual
B-5360
Item
Description
1
System LEDs
Indicates the camera status:
Amber LED
: Blinks when network activity is in progress.
Blue LED
: Lights up when the camera is powered up and
goes off again after the boot up process is complete.
Green LED
: Lights up when the camera is connected to a
network.
2
Audio Input
Connects to audio input devices, such as a microphone with
built-in amplifier, etc. See
How to Connect Audio In Device
on
page 22 for more information.
NOTE:
The microphone must have a built-in amplifier.
Connecting an ordinary microphone will dwarf sounds and will
result in inaudible recording.
3
Ethernet Port
(RJ-45)
Connects to a network using an Ethernet cable with RJ-45
connector.
4
Reset Button
Restores the factory default settings of the camera. To reset the
camera, while the power is on, press and hold the
Reset Button
for at least 5 seconds or until the
Blue LED
lights up.
5
Memory Card Slot
Insert a memory card (not included) into the slot for local
recording purposes. See
How to Install / Remove the Memory
Card
on page 20 for more information.
NOTE:
Supports microSDHC and microSDXC cards.
8
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
