advidia B-38-V Hardware Manual Download Page 3

 

 

B-38-V Bullet Camera

 

Hardware Manual 

 

 

 2 

 

Precautions 

Read these instructions 

You should read all the safety and operating instructions before using this product. 

Heed all warnings 

You must adhere to all the warnings on the product and in the instruction manual. Failure to follow the 

safety instruction given may directly endanger people, cause damage to the system or to other 

equipment. 

Servicing 

Do not attempt to service this video device yourself as opening or removing covers may expose you to 

dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 

Trademarks 

All names used in this manual are probably registered trademarks of respective companies. 

Liability 

Every reasonable care has been taken during the writing of this manual. Please inform your local office if 

you find any inaccuracies or omissions. We cannot be held responsible for any typographical or technical 

errors and reserve the right to make changes to the product and manuals without prior notice. 

Federal Communications Commission Statement 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 

1.  This device may not cause harmful interference. 

2.  This device must accept any interference received, including interference that may cause 

undesired operation. 

Note

: This equipment has been tested and found to comply with the limits for a Class A digital device, 

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 

harmful interference when the equipment is operated in a commercial environment. This equipment 

generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance 

with the instruction manual, it may cause harmful interference to radio communications. Operation of this 

equipment in a residential area is likely to cause harmful interference, in which case the user will be 

required to correct the interference at their own expense. 

European Community Compliance Statement 

This product has been tested and found to comply with the limits for Class A Information 

Technology Equipment according to European Standard EN 55022 and EN 55024. In a 

domestic environment, this product may cause radio interference in which cause the user 

may be required to take adequate measures. 

 

 

Summary of Contents for B-38-V























Reviews: