B-38-V Bullet Camera
Hardware Manual
9
Installation Procedures
This section describes the procedures in installing the camera on a flat surface such as a hard or dropped
ceiling and straight or tilted walls. Before installation, make sure the wall or ceiling can bear more than the
weight of the camera.
Step 1: Prepare for Installation
Depending on the wall material, purchase applicable screws and screws plugs (as needed) that can hold
the camera and bracket weight on the wall.
1. Attach the supplied drill template sticker on the wall.
2. Determine how the cable will be routed:
pass through the wall or along the wall
.
3.
If the cable will pass through the wall
, drill the cable hole and the three (3) screw holes on the
wall.
•
If the cable will be routed along the wall
, just drill the three (3) screw holes on the
wall.
4. Detach the drill template sticker from the wall and insert the plastic plugs into the screw holes.
