B-38-V Bullet Camera
Hardware Manual
18
Manually adjust the IP addresses of multiple cameras:
If there are more than 1 camera to be used in the same local area network and there is no DHCP server
to assign unique IP addresses to each of them, all of the cameras would then have the initial IP address
of
192.168.0.100
, which is not a proper situation for network devices – all the IP addresses have to be
different from each other. The easiest way to assign cameras the IP addresses is by using
IP Utility
:
With the procedure shown above, all the cameras will have unique IP addresses, starting from
192.168.0.101. In case there are 20 cameras selected, the last one of the cameras would have the IP
192.168.0.120.
Later, by pressing the “
Refresh
” button of the IP Utility, you will be able to see the list of cameras with
their new IP addresses.
Please note that it is also possible to change the IP addresses manually by using the Web browser. In
such case, please plug in only one camera at a time, and change its IP address by using the Web
browser before plugging in the next one. This way, the Web browser will not be confused about two
devices having the same IP address at the same time.
