A-44 V2/A-54 V2
·
Quick Start Guide
12
Note:
Press RESET for approximately 10 seconds when the camera is
powering on or rebooting to restore the default settings, including
the user name, password, IP address, port No., etc.
2
Installation
Before you start:
Make sure the device is in good condition and all the assembly
parts are included.
Make sure all the related equipment is powered-off during the
installation.
Check the specifications of the products to ensure they match the
installation environment.
Make sure the power supply matches the required voltage to
avoid damage.
If the product does not function properly, please contact your
dealer or the nearest service center. Do not disassemble the
camera for repair or maintenance by yourself.
Make sure that the wall is strong enough to withstand three times
the weight of the camera.
Note:
Please pay attention to the following precautions to prevent IR
reflection:
Summary of Contents for A-44-IR V2
Page 1: ...1 A 44 IR V2 A 54 V2 Quick Start Guide...
Page 17: ...A 44 V2 A 54 V2 Quick Start Guide 17 Figure 2 8 Complete the Installation...
Page 21: ...A 44 V2 A 54 V2 Quick Start Guide 21 Figure 3 4 Login Manager Figure 3 5 Launch Edit Table...
Page 25: ...A 44 V2 A 54 V2 Quick Start Guide 25 Figure 4 2 Download Plug in Figure 4 3 Install Plug in...
