manualshive.com logo in svg

Advida P-25, Installation Manual, Page: 7 / 48

Share
Download
Advida P-25 Installation Manual Download Page 7

7

About the user manuals

There are 2 sets of operating instructions for the P-25 as follows.

  •  Installation Guide: Explains how to install and connect devices.
  •  Operating  Instructions  (included  in  the  CD-ROM):  Explains  how  to  perform  the  settings  and 

how to operate this camera. 

Adobe

®

 Reader

®

 is required to read these operating instructions on the provided CD-ROM.

When the Adobe Reader is not installed on the PC, download the latest Adobe Reader from the 
Adobe web site and install it. 

The external appearance and other parts shown in this manual may differ from the actual product 
within the scope that will not interfere with normal use due to improvement of the product.

English screens are used in these operating instructions.

System requirements for a PC

CPU: Intel

®

 Core

TM

 2 Duo 2.4 GHz or faster recommended

Memory: 

A minimum of 1 GB or more (for 32-bit OSs), 2 GB or more (for 64-bit OSs) 
memory is required when using Microsoft

®

 Windows

®

 8.1, Microsoft

®

 

Windows

®

 8, Microsoft

®

 Windows

®

 7. 

 

A minimum of 1 GB or more memory is required when using Microsoft

®

 

Windows Vista

®

. 

Network interface: 

10BASE-T/100BASE-TX 1 port

Audio interface: 

Sound card (when using the audio function)

Monitor: 

Image capture size: 1024 x 768 pixels or more

 

Color: 24-bit True color or better

OS: Microsoft

®

 Windows

®

 8.1

 Microsoft

®

 Windows

®

 8

 Microsoft

®

 Windows

®

 7

 Microsoft

®

 Windows Vista

®

Web browser: 

Windows

®

 Internet Explorer

®

 11 (32-bit)

 Windows

®

 Internet Explorer

®

 10 (32-bit)

 Windows

®

 Internet Explorer

®

 9 (32-bit)

 Windows

®

 Internet Explorer

®

 8 (32-bit)

 Windows

®

 Internet Explorer

®

 7 (32-bit)

Others: 

CD-ROM drive

 

(It is necessary to read the operating instructions and use the software on 
the provided CD-ROM.)

 Adobe

®

 Reader

®

 

(It is necessary to view the PDF file on the provided CD-ROM.)

Summary of Contents for P-25

















































Reviews:

No comments