11
The screws and bolts must be tightened to
the specified torque.
Failure to observe this may cause a drop
resulting in injury or accidents.
Do not rub the edges of metal parts with
your hand.
Failure to observe this may cause injury.
Do not install or clean the camera, or
touch this product, the power cable or the
connected cables during thunder storms.
Failure to observe this may cause electric shock.
Keep SD memory card away from infants
and children.
Otherwise, they may swallow the card by mis-
take.
In this case, consult a doctor immediately.
The measures of protection against snow-
fall shall be taken.
In areas where lots of snow accumulates, the
weight of snow may cause the product to fall
resulting in injury or accidents. Protect the
product against snowfall by installing under
eaves.
Be sure to install the safety wire.
The measures of protection against a fall
of this product shall be taken.
Failure to observe this may cause a drop result-
ing in injury or accidents.
Do not damage the power cable.
Do not damage, fabricate, twist, stretch, bun-
dle,
or forcibly bend the power cable. Do not
place heavy objects on it, and keep it away
from heat sources.
Use of a damaged power cable may cause
electric shock, short circuit, or fire.
Consult the dealer for repair.
Correctly perform all wiring
Short circuits in the wiring or incorrect wiring
may cause fire or electrical shock.
Do not install this product on a place that
is greatly influenced by wind.
Installation on a place where the wind speed is
60 m {196.85 feet} or more per second may
cause a fall of the product resulting in injury or
accidents.
Turn the power off when cleaning this product.
Failure to observe this may cause injury.
[Precautions for use]
This product has no power switch.
When turning off the power, disconnect the
power supply from the 12 V DC power supply or
the PoE device.
To keep on using with stable performance
Do not use this product in hot and humid con-
ditions for a long time. Failure to observe this
causes component degradation resulting in life
shortening of this product.
Do not expose the product to direct heat
sources such as a heater.
Do not touch the front cover (transparent
cover) with your bare hands.
A dirty cover causes deterioration of picture quality.
Handle this product with care.
Do not drop this product, nor apply shock or
vibration to the product. Failure to observe this
may cause trouble. If a strong shock or vibra-
tion is applied to the front cover, it may cause
damage or allow water to enter this product.
About the battery
A battery is installed inside the camera. Do not
leave the battery exposed in environments of
excessive heat as a result of sunlight or fire.
About the PC monitor
Displaying the same image on a monitor for a
long time may damage the monitor. It is recom-
mended to use a screen-saver.