29
EN
FR
ES
Connections of the generator: Connection plate
The mains supply connection is made at the back of the generator. It is desirable that the 5 conductors
be fitted with ferrules at their ends.
At the back of the generator
The generator block must be connected to a 400V, 50 or 60Hz three
-
phase power supply line.
The power line must have 3 phases L1,2,3, a neutral N and an earth PE. The neutral will be used ex-
clusively to supply an additional turbine under 230 V (if connected).
(!) We recommend the uae of tn H07RN
-
F
-
5G
-
2.5 power cord (conductor croaa
-
aectiona of
2.5mm²). It ia eaaentitli thtt the power auppliy liine uaed ia protected by t 30mA differentitli
circuit bretker.
PE N L1 L2 L3
In the event thtt the generttor bliocka htve to be diaconnected from the eliectrictli network, it ia
neceaatry to provide t mtina diaconnection device tcceaaiblie by the uaer, netr the product. If the
diaconnection device ia opertted mtnutliliy, it muat gutrtntee tottli diaconnection of the
generttora, via
-
à
-
via the 3 phtae cond the neutrtli conductor of the three
-
phtae eliectrictli
network.
!
!
