Advent BMWBCON, Owner'S Manual

Page: 7 / 36

3
ARMREST DVD SYSTEM BMWTCON / BMWBCON Owner’s Manual
Wireless IR Headsets
The Armrest DVD System includes a built-
in single channel infrared transmitter for
use with wireless IR headsets. The volume
can then be adjusted with the controls on
each headset. The wireless IR headsets
must be used within a line of sight from
the transmitter as infrared transmission, like
visible light, travels only in an unrestricted
line of sight.
Wired Headsets
There are two 1/8-inch (3.5mm) headset
jacks on the device that can be used with
any standard stereo headsets. Lift the
rotating protective cover to access the jacks.
Remember to close the rotating protective
cover when the jacks are not in use.
AUX AV Input
The additional audio/video (AUX) input may
be used to connect other items such as a DVD
player, video game device, or other audio/
video devices. To play the AUX source lift the
rotating protective cover to access the AV
INPUT jacks and plug the external device to
the yellow, white and red jacks. Remember
to close the rotating protective cover when
the jacks are not in use, turn the Armrest DVD
System ON and press the SOURCE button on
the remote control until “AUX” is displayed on
the screen. Turn the source component ON
with its power button or remote control. The
Armrest DVD System is now ready to play
the audio and video signals from the source
connected to AUX input.
Wireless FM Transmitter
Your video device is equipped with an
external FM transmitter, which allows you
to listen to the audio signal by tuning your
vehicle’s FM radio to one of six frequencies.
Whenever the FM transmitter is active,
regular radio reception may be poor. Turn
the FM transmitter off to allow normal radio
reception.
How to Use the FM Transmitter
Power up Armrest DVD System and place
a disc into the DVD slot. Next press the
“SOUND AROUND {ON/OFF}” button to
turn FM transmission ON. Press the “SOUND
AROUND {SELECT}” button to cycle through
and select one of the six possible stations
(88.3, 88.7, 89.1, 89.5, 89.9, and 90.3 MHz) for
broadcasting audio to your radio.
Once you’ve selected a frequency, you must
then tune your radio to the corresponding
frequency. Try each station frequency until
you achieve a clear audio signal.
USB Input
A USB memory device (eg. thumb drive) may
be used by connecting the device to the USB
port on the unit. Lift the rotating protective
cover to access the USB connection. The
USB device can be played by selecting
“DVD” as the video source. The USB device
will automatically start up upon connection,
thereby overriding the DVD disc. Disconnect
the USB device to play DVD’s and CD’s.
Remember to close the rotating protective
cover when the USB jack is not in use.
Product Features