background image

Important Notice

An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the
driver if the LCD panel or video monitor is used for vehicle information, system control,
rear or side observation or navigation. If the LCD panel or video monitor is used for
television reception, video or DVD play, the LCD panel or video monitor must be installed
so that these features will only function when the vehicle is in "park" or when the vehicle

,

s

parking brake is applied.

An LCD panel or video monitor used for television reception, video or DVD play that
operates when the vehicle is in gear or when the parking brake is not applied must be
installed to the rear of the driver

,

s seat where it will not be visible, directly or indirectly, to

the operator of the motor vehicle.

I

nstallation of overhead products requires careful planning and preparation. Be

extremely careful when working on a vehicle with side curtain air bags. Do not route wires
near any portion of the side curtain air bag assemblies. This includes any anchor points in
A, B, C or D pillars of the vehicle. Routing wires in these areas or running wires by the side
curtain air bags can prevent the side curtain air bag from fully deploying which can result
in personal injury to vehicle occupants. If you have any questions regarding wire routing
in a vehicle, please contact Audiovox Technical Support at 1-800-225-6074.

When connecting power and ground in a mobile video installation ensure that the ACC
wire is fused at the point where it is connected to the vehicle ACC wiring. Failure to do
so can result in damage to the vehicle if a short circuit develops between the vehicle
connection point and the mobile video product.

Important Note

The ADV10A incorporates two new features:
1) A wireless FM Modulator
2) Snap on Covers with matching Trim Rings (Shale and Pewter).

Select the color that matches the interior trim.

Please be advised that the wireless FM modulator will perform well in most

applications. However, in certain applications the quality of the wireless
signal may be less than optimal, resulting in static or strong local station
bleed through.

Licensed under one or more of the following patents,
Patent NOS. 5,775,762 , 5,927,784 and 6,678,892

2

Summary of Contents for ADV10A













Reviews: