AdvenChair Field Guide
Page 14
10.
Adjust the upper footrest
(optional component): (Figure 10)
Adjusting the upper footrest is best done with the rider in the chair.
a.
Upper footrest position:
Loosen the ratchet handles on both sides of the front of the
upper footrest assembly, slide the upper footrest forward or back to the desired
position and clamp it in place with the two ratchet handles.
b.
Upper footrest angle:
Loosen the ratchet handles just below the center of the upper
footrest on both sides; pull the pins just in front of those ratchet handles; rotate the
upper footrest to an angle comfortable for the rider; insert the pins; and tighten the
ratchet handles. There is no button to push to release these pins.
c.
Strap the rider’s feet into the footrest:
Buckle the footrest straps together over the
rider’s feet and pull snug. (The footrest straps are on both the standard footrest and
the optional upper footrest and are not shown.)
Figure 10. Controls for adjusting the position/angle of the optional upper footrest.
