advantest corporation TR5821 Operation Manual Download Page 11

Page: 11 / 109

SECTION 1

G E N E R A L I N F O R M A T I O N

1-1. General

The

TR5821/5822/5823/5823H

are compact, inexpensive universal counters

with the capabilities comparable to medium-scale counters. These are the

It became possible to process data with a self-diagnostic function and

various operations (by using

TR1644).

Since GPIB, BCD (TTL)

output, and analog output (D/A converter) are available, these

equipments can support various system.

TR5821

is a universal counter that can measure frequencies of up to

120 MHz, and can display results in arbitrary form with

TR1644

(an extra-cost option).

The

TR5822

has the same functions as the

TR5821

plus a built-in GPIB

interface, and the functions of the

TR5823

include an ultrahigh-frequency

measurement (1.3 GHz) and a burst signal measurement in addition to the

functions of the

TR5821.

The

TR5823H

is provided with the high-stability oscillator (aging rate:

5 x l 0 “

/day) as a standard feature plus the capabilities of the

TR5823.

* The

TR5823

described in this manual also includes the functions of the

TR5823H.

1 -1

Summary of Contents for TR5821














































































































Search results

Summary of Contents for TR5821

Reviews:

Related manuals for TR5821

Brands by name

Popular brands

advantest corporation TR5821, Operation Manual

Search results

Summary of Contents for TR5821

Reviews:

Related manuals for TR5821

Brands by name

Popular brands