manualshive.com logo in svg

Advantek PixLite R4D-S, User Manual

Share
Download
Advantek PixLite R4D-S User Manual Download Page 3

- 3 -

www.advateklights.com

PixLite R4D-S User Manual V211013

2 - Introduction

This is the user manual for the PixLite R4D-S pixel receiver, hardware version 1.3.

The PixLite R4D-S is designed to receive differential long distance signals of 300m
(1000') or more over a standard network cable from a PixLite T8 transmitter unit, and
convert these input signals back into a pixel-ready signal for output directly to pixels.
The PixLite R4D-S features 4 data-only outputs, each having both a dedicated fuse
and 'fuse good' LED indicator.

The PixLite R4D-S features a sleek, compact design and 4 holes for ease of wall
mounting as well as an optional DIN rail mounting kit. It also features industrial grade
protection on all inputs and outputs, making it the ideal option for reliable
commercial and industrial applications.

This manual covers physical aspects of the PixLite R4D-S receiver and its essential
setup steps only. Separate user manuals are available for the transmitter units. Other
manuals may be downloaded from here:

www.advateklights.com/downloads

Summary of Contents for PixLite R4D-S




















Reviews:

No comments

Brands by name

Popular brands

Load more brands