Advantek PixLite R4D-S, User Manual

Page: 10 / 19

- 10 -
www.advateklights.com PixLite R4D-S User Manual V211013
type of pixel. You need to consider if your pixel load will draw more than 7.5A of
current and whether there will be too much voltage drop in the pixel load for it to only
be powered from one end. If you need to “inject power” we recommend bypassing
the receiver’s power output pins entirely.
If a fuse needs replacing, a suitable replacement fuse is of type "F7.5A E 32V". An
additional spare fuse is also provided for quick replacement which can be accessed
by opening the lid, as shown in
Figure 6 below.
Figure 6: Internal View of the PixLite R4D-S
No on- board power configuration is required. Power to the logic circuitry is
automatically regulated from the power input. Simply connect your DC power supply
in accordance with specifications listed in
Section 7.1 to the power screw terminal, as
shown in Figure 5 above.
5.3 - Data Input
Data is connected via a standard network cable into the RJ45 jack located on the
front panel of the unit, as shown in
Figure 7 below.