BB-ZP9D115RMLR-A Radio Modem
42
RT (GPI1 Configuration)
Command
<Serial Interfacing> The RT
command is used to set/read the
behavior of the GPI1 pin (pin 10) of
the OEM RF Module. The pin can be
configured to enable binary
programming or RTS flow control.
SB (Stop Bits) Command
<Serial Interfacing> The SB
Command is used to set/read the
number of stop bits in the data
packet.
SH (Serial Number High)
Command
<Diagnostics> SH Command is used
to set/read the serial number high
word of the RF module.
AT
Command:
ATRT
Binary Command: 0x16 (22 decimal)
Parameter
Range:
0 - 2
Parameter
Configuration
0
Disabled
1
Enable Binary
Programming
2
Enable RTS Flow
Control
Default Parameter Value:
0
Number of Bytes Returned: 1
AT
Command:
ATSB
Binary Command: 0x37 (55 decimal)
Parameter
Range:
0 - 1
Parameter
Configuration
0
1 stop bit
1
2 stop bits
Default Parameter Value:
0
Number of Bytes Returned: 1
AT Command: ATSH
Binary Command: 0x25 (37 decimal)
Parameter Range (read-only): 0 - 0xFFFF
Default Parameter Value: varies
Number of Bytes Returned: 2
Related Commands: SL (Serial Number Low)
