manualshive.com logo in svg

Advantech WISE-3610, User Manual, Page: 53 / 84

Share
Download
Advantech WISE-3610 User Manual Download Page 53

41

WISE-3610 User Manual

Chapter 3

S

oftware

Functionality

3.17.15

Remote Certificate

The certificate of peer site for IKE negotiation. 

3.17.16

IKE Algorithms

The security parameters for IKE phrase 1 negotiation. It supports following combina-
tion: 3des-md5-modp1024, 3des-md5-modp2048, 3des-sha1-modp1024, 3des-
sha1-modp2048, aes128-md5-modp1024, aes128-md5-modp2048, aes128-sha1-
modp1024, aes128-sha1-modp2048, aes256-sha1-dh22, aes256-sha1-dh23,
aes256-sha1-dh24. 

3.17.17

IKE Lifetime

The lifetime of IKE phrase 1 negotiation. Before it is timeout, the IKE phrase 1 will be
re-negotiated.

3.17.18

ESP Algorithm 

The security parameters for IKE phrase 2 negotiation. It supports following combina-
tion: 3des-md5-modp1024, 3des-md5-modp2048, 3des-sha1-modp1024, 3des-
sha1-modp2048, aes128-md5-modp1024, aes128-md5-modp2048, aes128-sha1-
modp1024, aes128-sha1-modp2048, aes256-sha1-dh22, aes256-sha1-dh23,
aes256-sha1-dh24.

3.17.19

Perfect Forward Secret 

Perfect Forward Secret security feature for IKE negotiation. 

3.17.20

SA Lifetime

The lifetime of IKE phrase 2 negotiation. Before it is timeout, the IKE phrase 2 will be
re-negotiated.

3.17.21

DPD Delay

The delay in seconds between Dead Peer Detection keepalives (R_U_THERE,
R_U_THERE_ACK).

Summary of Contents for WISE-3610





















































































Reviews:

No comments