Advantech WISE-3610, User Manual, Page: 37 / 84

25 WISE-3610 User Manual
Chapter 3
S
oftware
Functionality
(3) PPPoE
When user chooses PPPoE, LoRa gateway will try to get IP on Ethernet WAN port
via PPPoE protocol. In addition, user need to configure related PAP/CHAP user-
name, and password. The Access Concentrator and Service Name are optional
according to operator’s environment.
3.3.3 WAN / WAN Failover
When WAN / WWAN Failover function is enabled, LoRa gateway will use Ethernet
WAN or 3G module to connect to network. When LoRa gateway boots up, it prefers
to use Ethernet WAN to connect to network, and will switch to 3G if there are no traf-
fic in a minute. In addition, it will switch to Ethernet WAN if there are no traffic on 3G
interface. When this function is disabled, only Ethernet WAN can be used to connect
to network.
3.3.4 SouthBound
Visit
Network
->
Gateway Deployment
. The SouthBound TAB includes LAN side IP
and DHCP server related settings.
3.3.4.1 LAN IPv4 address and netmask
The SouthBound LAN side IP address and netmask setting
3.3.4.2 DHCP Server
The ON/OFF switch for LAN side DHCP Server function
3.3.4.3 Start
The start of IP address that DHCP Server will assign to client. User can input lowest
leased address as offset from the LAN IPv4 address (e.g. 100) or input the exactly
start of IP address (e.g. 192.168.1.100).