UNO-3000G Series User Manual
40
A.11
Clear CMOS (JP2)
This jumper is used to erase CMOS data and reset system BIOS information.
Follow the procedures below to clear the CMOS.
1.
Turn off the system.
2.
Close jumper JP2 (2-3) to clear CMOS .
3.
Remove jumper JP2 (1-2)
4.
Turn on the system. The CMOS is now cleared.
5.
Turn on the system. The BIOS is reset to its default setting.
A.12
System Power AT or ATX Selection (JP3)
UNO-3000G series product can set AT or ATX power mode in the bios or hardware
jumper setting.
17
AUX CH (n)
18
Hot Plug
19 Return
20 DP_PWR
Table A.11: DisplayPort adaptor cable pin assignment
Table A.12: JP2 Clear CMOS
Configuration Function
Clear CMOS
Normal ( Default)
1
2
3
1
2
3
Table A.13: AT/ATX Selection
Configuration Function
AT mode
ATX mode (default)
1
2
3
1
2
3
