UNO-3000G Series User Manual
4
1.3.3
Expansion Board(Additional purchase required)
1.4
Safety Precautions
The following sections tell how to make each connection. In most cases, you will sim-
ply need to connect a standard cable.
1.5
Chassis Dimensions
Figure 1.1 UNO-3083G/3073G/3073GL Dimensions
Backplane
Description
Where Used
UNO-3083G-BP01E
1 ×PCIe×16 slot and 2 ×PCI slots
UNO-3083G/3073G
UNO-3083G-BP02E
2 ×PCIe×8 slots and 1 ×PCI slot
UNO-3083G/3073G
UNO-3083G-BP03E
1 ×PCIe×1 slot and 2 ×PCI slots
UNO-3083G/3073G/3073GL
UNO-3083G-BP04E
2 ×PCIe×1 slots and 1 ×PCI slot
UNO-3083G/3073G/3073GL
UNO-3085G-BP01E
1 ×PCIe×16 slot and 4 ×PCI slots
UNO-3085G/3075G
UNO-3085G-BP02E
2 ×PCIe×8 slots and 3 ×PCI slots
UNO-3085G/3075G
UNO-3085G-BP03E
2 ×PCIe×1 slot and 3 ×PCI slots
UNO-3085G/3075G/3075GL
Warning! Always disconnect the power cord from your chassis whenever you are
working on it. Do not connect while the power is on. A sudden rush of
power can damage sensitive electronic components. Only experienced
electronics personnel should open the chassis.
Caution! Always ground yourself to remove any static electric charge before
touching UNO-3000G series. Modern electronic devices are very sensi-
tive to static electric charges. Use a grounding wrist strap at all times.
Place all electronic components on a static-dissipative surface or in a
static-shielded bag.
