27
UNO-3000G Series User Manual
Chapter 3
Initial Setup
3.2
Connecting Power
Connect one or two 12~24VDC(±20%) power source to the UNO-3083G/85G/
73G(L)/75G(L). The power source can be from either a power adapter or an in-house
power source.
Figure 3.1 Dual Power Connector
3.3
Installing a Hard Disk
Please follow the below steps to install a HDD into the system.
1.
Remove the power cord.
2.
Screw off six screws on the side panel for UNO-3083G/3073G/3073GL; Screw
off two screws on the front panel for UNO-3085G/3075G/3075GL.
Figure 3.2 UNO-3083 Instillation Guide
