![background image](http://html1.mh-extra.com/html/advantech/trek-775/trek-775_user-manual_2856517037.webp)
21
Chapter 3
3.
The IDE cable (1 x 44-pin to 1 x 44-pin) is located next to the CFC
adapter board. Connect the IDE cable to the CFC. Make sure that
the red wire corresponds to Pin 1 on the connector, which is labeled
on the board. Plug the other end of the cable into the CFC, with Pin
1 on the cable corresponding to Pin 1 on the CFC.
3.3 Placing the Rubber Seal
To ensure that the TREK-775/TREK-776 stays dry, the supplied rubber
seal must be placed correctly between the front bezel and the back cover.
Please note the direction of the seal: the flat, marked side should face up.
Figure 3.5: Placing the rubber seal
Marked
UP
Flat (UP)