TREK-775/TREK-776 User Manual
xii
Figure 3.4 Inserting the CFC into the slot................ 20
3.3 Placing the Rubber Seal.................................21
Figure 3.5 Placing the rubber seal............................ 21
3.4 Installing the Optional Accessories...............22
3.4.1
Installing the “Universal Arm” ..................................... 22
Figure 3.6 Universal Arm ........................................ 22
3.4.2
Installing RAM-MOUNT “kits”................................... 23
Figure 3.7 Installing RAM-MOUNT kits ................ 23
3.4.3
Installing the MiniPCI WLAN module ........................ 24
Figure 3.8 Installing the MiniPCI WLAN module .. 24
3.4.4
Installing GPS and GSM/GPRS modules..................... 25
Figure 3.9 Installing GPS and GSM/GPRS modules .. 25
Figure 3.10 Connector on module and adapter board 25
Figure 3.11 Complete GSM/GPRS - GPS Installation..... 26
Chapter
4 Jumper Settings and Connectors..................28
4.1 Setting Jumpers..............................................28
4.1.1
Jumpers and switches.................................................... 29
Table
4.1 Jumpers and their functions.................... 29
4.1.2
Locating jumpers and switches..................................... 29
Locating jumpers on the TREK-775/TREK-776 ......... 29
4.1.3
Connectors on the motherboard.................................... 30
Table
4.2 Connectors .............................................. 30
4.1.4
Locating connectors on the motherboard...................... 31
Figure 4.2 Connector locations on TREK-775/TREK-
776........................................................ 31
4.1.5
Jumpers and switches on power board ......................... 32
Table
4.3 Connectors on Power board.................... 32
4.1.6
Locating jumpers, connectors and LEDs on power board..... 33
Figure 4.3 Power board connectors TREK-775/
TREK-776............................................ 33
4.2 CPU Installation .............................................34
4.3 Jumper Settings on Mother-Board...............34
4.3.1
LCD panel power setting (JP1)..................................... 34
Table
4.4 LCD panel power setting (JP1) .............. 34
4.3.2
Panel Type Setting (JP5)............................................... 34
Table
4.5 LCD panel type setting (JP5).................. 34
4.3.3
CMOS clear for external RTC (JP2)............................. 35
Table
4.6 Clear CMOS / external RTC (JP1) ......... 35
4.4 COM-port Interface.......................................36
Table
4.7 Serial port default settings ...................... 36
4.4.1
COM port Pin 9 power output setting (JP3) ................. 37
Table
4.8 COM port Pin 9 power output setting (JP3).. 37