Advantech TREK-510, User Manual

Page: 26 / 89

TREK ‐ 510 User manual 26
4.1.3 Connectors
. The table below lists the function of each connector.
Table 4.1.3.1: Connectors on motherboard
Location Function
CN1 Power input connector
CN2 Vehicle Grounding connector
SW1 Reset connector
SW2,SW3 System setting switch
CN4 USB Client connector
CN5 SD Card connector
CN6 USB HOST TYPE ‐ A connector
CN7 USB HOST TYPE ‐ A cable connector (reserve)
CN8 Audio and Speaker Jack connector
CN9 VGA connector
CN10 RS232 connector (debug only and reserve)
CN11 JTAG connector (debug only and reserve)
CN12 CAN BUS termination connector
CN13 Full function 8 ‐ wire RS232 connector
CN19 Isolated DI/DO and CAN bus connector
CN20 on board GPS antenna connector
CN21 RF Module board cable connector
CN22 UBLOX GPS module board cable connector
CN23 RTC battery connector
J1 uP RS232 connector (debug only and reserve)
J2 up burning image connector