Advantech TPC-1051WP Series User Manual Download Page 23

Page: 23 / 84

TPC-1051WP1551WP Series User Manual

Chapter 2

ystem

Setup

System wiring

Step A: Connect the cabinet to earth ground.

Step B: Ensure that all cabinet has been grounded together.

Step C: Connect the ground of the power supply to the cabinet.

Step D: Connect the ground pin of TPC-xx51WP series to the cabinet.

Step E: Connect the I/O to the controller if needed.

Step F:

Connect the V+ and V- of power supply to TPC-xx51WP series.

While completing step A to F step by step, you can supply power to TPC-xx51WP series now.

Note!

Make sure all wires follow the installation guidelines or it may cause
issues.

Note!

If you install a USB device or Mini PCIe card on the TPC-xx51WP
series, please double check the voltage between V- and earth ground, if
the voltage is not almost equal with each other, we suggest to short V-
and earth ground with wiring.

Summary of Contents for TPC-1051WP Series





















































































Search results

Summary of Contents for TPC-1051WP Series

Reviews:

Related manuals for TPC-1051WP Series

Brands by name

Popular brands

Advantech TPC-1051WP Series, User Manual

Search results

Summary of Contents for TPC-1051WP Series

Reviews:

Related manuals for TPC-1051WP Series

Brands by name

Popular brands