Advantech TPC-1051WP Series, User Manual

Page: 21 / 84

13 TPC-1051WP1551WP Series User Manual
Chapter 2
S
ystem
Setup
2.2 Transport and Unpacking
When accepting a delivery, please check the packaging for visible transport damage
and check the delivery for completeness by comparing it with your order. If you notice
any shipping damage or inconsistencies between the contents and your order,
please inform the responsible delivery service immediately.
During transport, the TPC should be protected from excessive mechanical stress. If
the TPC is transported or stored without packaging, shocks, vibrations, pressure and
moisture may impact the unprotected unit. A damaged packaging indicates that
ambient conditions have already had a massive impact on the device. Therefore,
please use the original packaging during transportation and storage.
If the TPC is transported in cold weather or is exposed to extreme variations in tem-
perature, make sure that moisture (condensation) does not build up on or inside the
HMI device. Moisture can result in short-circuits in electrical circuits and damage the
device. To avoid that, please store the TPC in a dry place and bring the TPC to room
temperature before starting it up. If condensation occurs, a delay time of approxi-
mately 12 hours must be allowed to make sure the TPC is completely dry before the
TPC is switched on.
2.3 Panel Mounting
1. Position the TPC against the panel.
2. Insert the clamps into the side of the TPC.