17
SOM-6765 User Manual
Chapter 3
B
IOS Setup
Information
Set the time-out value for Control, Bulk, and Interrupt transfers.
Device reset time-out
Set USB mass storage device Start Unit command time-out value.
Device power-up delay
Set the maximum time of the device will take before it properly reports itself to the
Host Controller. 'Auto' uses default value: for a Root port it is 100 ms, for a Hub port
the delay is taken from Hub descriptor.
3.3.8
Embedded Controller Configuration
Figure 3.11 Embedded Controller Configuration
EC iManager WatchDog IRQ
This item allows users to set the irq number of EC watchdog.
EC Power Saving Mode
This item allows users to set board°Øs power saving mode when off.
CPU Shutdown Temperature
This item allows users to set the value of CPU shutdown temperature.
EC iManager Smart FAN
This item allows users to enable or disable smart FAN feature.
Backlight Function
This item allows users to set backlight enable polarity.
