Advantech SNMP-1000-B1 User Manual Download

Page: 31 / 86

3.2.1.2 Control Group:

The following items can be set under this command:
• Admin User Name: The user name of SNMP-1000-B1 administrator.

Only the administrator is allowed to enter the console mode. Default
user name is "advantech".

• Admin User Password: The administrator password. With this pass-

word a user is allowed to read and write to SNMP-1000-B1. Default
password is "admin".

• Community Read-Only: A general password for read-only access.

Default read only password is "public".

•  BOOTP/DHCP Control: Enables/disables the BOOTP/DHCP protocol.
•  Telnet Control: Enables/Disables the Telnet protocol.
•  TFTP Upgrade Control: Enables/disables the TFTP protocol for firm-

ware upgrade through the local network

• HTTP Security Control: Enables/disables the HTTP login password

request.

3.2.1.3 Parameter Group:

The following items can be set under this command:

Summary of Contents for SNMP-1000-B1























































































Search results

Summary of Contents for SNMP-1000-B1

Reviews:

Related manuals for SNMP-1000-B1

Brands by name

Popular brands

Advantech SNMP-1000-B1, User Manual

Search results

Summary of Contents for SNMP-1000-B1

Reviews:

Related manuals for SNMP-1000-B1

Brands by name

Popular brands