Advantech SNMP-1000-B1, User Manual

Page: 29 / 86

19
3.2 Configuration through the Serial Port
Take the following Hyperterminal of Windows (95, 98, Me, NT, 2000 or
XP) as an example.
1.
Start Hyperterminal by clicking on "Accessories" program group.
2. Enter a name and choose an icon for the connection.
3. In the "Connect using" box, select "Direct to COMx". Here x is the
number of COM port you are using to connect to the SNMP-1000-
B1.
4. Set the serial port of your PC to be 9600 bps, 8 data bits, no parity,
1 stop bit with no flow control.
5. Press "Enter" key of your PC then the SNMP-1000-B1 will prompt
you for entering administrator user name and password. The
default administrator user name is "advantech" and password is
"admin".
After entering password, you can choose one of following items:
Note: Access through Telnet or serial port is permitted
only with the "Admin User Name" and "Admin
User Password" set in Control Group.