Advantech SNMP-1000-B1, User Manual

Page: 19 / 86

9
MJ1: Restores the username and password to default. It is used when
users forget their username and password. It should be left open under
normal operation.
Operation procedure:
1. Fully turn SNMP-1000-B1 off, remove the backup battery.
2. Short MJ1 by a jumper
3. Power up SNMP-1000-B1 and wait until it is ready to work.
4. Power it off.
5. Remove MJ1. The username and password is restored to "advantech"
and "admin"
MCN1 and MCH2: Sensor and I/O interface (Please refer to Appendix A
for the pin assignments)
2.2 Connecting sensors and I/O ports
This section illustrates how to connect sensors and I/O ports using PCI/
ISA full-function extension board as an example. Your extension board
may not have all the I/O functions.
The PCI/ISA extension module is designed to have an ISA edge and a
PCI edge. It can be inserted to an ISA bus slot or a PCI bus slot to detect
Figure 2.2: Connectors on kernel module