54
PPC-103 User's Manual
PS/2 Mouse Function Control
When enabled, the PS/2 mouse is activated.
The options are: Disabled (Default), Enabled.
PCI/VGA Palette Snoop
When enabled, allows you to install an enhanced graphics adapter
card. If your graphics adapter card does not support the Palette Snoop
function, set at "Disabled" to avoid system malfunctions.
The options are: Disabled (Default), Enabled.
OS Select For DRAM > 64MB
If your operating system (OS) is OS2, select "OS2". Otherwise, stay
with the default setting Non-OS2.
Report No FDD For WIN 95
Assigns IRQ6 for the FDD.
The options are: Yes (Default), No.
Video BIOS Shadow
When enabled, allows the BIOS to copy the video ROM code of the
add-on video card to the system memory, giving faster access.
The options are: Enabled (Default), Disabled.
C8000-CBFFF Shadow through to DC000-DFFFF Shadow
When enabled, allows the BIOS to copy the BIOS ROM code of the
add-on card to the system memory for faster access. It may improve
the performance of the add-on card. Some add-on cards will not
function properly if their BIOS ROM codes are shadowed. To use this
option correctly, you need to know the memory address range used by
the BIOS ROM of each add-on card.
The options are: Disabled (Default), Enabled.
4.5
Chipset Features Setup
Note:
It is strongly recommended that setup items in this
section NOT be changed, because advanced
Summary of Contents for PPC-103
