Advantech PPC-103, Manual

Page: 61 / 140

Chapter 3 Jumper Settings and Connectors 4 5
3.4.2 COM3 / COM4 pin 9 output type setting (JP5)
Table 3-8: COM3/COM4 pin 9 setting (JP5)
*Normal operation +5 V output +12 V output
* default setting
Note: Pins 1, 3 and 5 are for COM3.
Pins 2, 4 and 6 are for COM4.
3.5 VGA Interface
The panel PC's AGP VGA interface can drive conventional CRT
displays. It is also capable of driving a wide range of flat panel
displays, including electroluminescent (EL), gas plasma, passive LCD
and active LCD displays. The board has two connectors to support
these displays simultaneously: one for standard CRT VGA monitors,
and one for flat panel displays.
3.5.1 LCD panel power setting
The panel PC's AGP SVGA interface supports 5 V and 3.3 V LCD
displays. The LCD cable already has a built-in default setting. You do
not need to adjust any jumper or switch to select the panel power.
5
3
1
6
4
2
5
3
1
6
4
2
5
3
1
6
4
2