Advantech POD-6704 Series, Manual

Page: 50 / 120

4 4 POD-6704 User's Manual
4.1 Introduction
The POD-6704 has an on-board VGA interface. The specifications and
features are described as follows:
4.1.1 Chipset
The POD-6704 makes use of the display properties of the Intel 815E
AGP/SVGA controller. It supports interlaced and non-interlaced
analog monitors (color and monochrome VGA) in high-resolution
modes while maintaining complete IBM VGA compatibility. Digital
monitors (i.e. MDA, CGA, and EGA) are NOT supported. Multiple
frequency (multisync) monitors are handled as if they were analog
monitors.
4.1.2 Display memory
Display memory is shared with system memory; the POD-6704
supports 8/16/32 MB frame buffer with system memory.
4.1.3 Display types
CRT and panel displays can be used simultaneously. The POD-6704
can be set in one of three configurations: on a CRT, on a flat panel
display, or on both simultaneously. The system is initially set to
simultaneous display mode. The BIOS setup can be used to configure
the display. In BIOS, select “Integrated Peripherals”, then “Boot-up
display type.” You can then choose one of the following modes:
“CRT only”, “Panel only”, or “Simultaneous.”
4.1.4 Dual/simultaneous display
The POD-6704 uses the Intel 815e controller that is capable of
providing multiple views and simultaneous display with mixed video
and graphics on a flat panel and CRT.