Advantech POD-6704 Series, Manual

Page: 23 / 120

Chapter 2 Installation 17
2.4.7 CMOS clear function (J8)
Warning: To avoid damaging the computer, always turn off
the power supply before setting "Clear CMOS".
Set the jumper back to normal before turning on
the power supply.
Table 2-8: CMOS clear (J8)
*Normal CMOS data clear
* default setting
1
1
2.4.8 System LED connector (J10)
J10 is for your basic power on indicator. Connect an LED to J10,
and when system power is on, the LED will be on.
2.4.9 CF master/slave select (J11)
J11 is a jumper that can select the state of CompactFlash. When
this jumper is open, Compact Flash is slave. When this jumper is
shorted, CompactFlash is master.
2.4.10 HDD LED connector (J12)
Basic HDD activity indicator. Connect an LED to J12, and when
there is disk activity, the LED lights up.