Advantech POC-W243L Series, User Manual

Page: 18 / 30

POC-W243L Series User Manual 10
2.2 Installation Procedures
2.2.1 Connecting the power cord
The POC-W243L can only be powered by a DC power adapter (FSP Model
no.FSP084-DIBAN2). Be sure to always handle the power cords by holding the plug
ends only.
Follow these procedures in order:
1. Connect the female end of the power adapter to the DC jack of the panel PC
(see Figure 2.4)
2. Connect the female end of the power cord to the DC power adapter
3. Connect the 3-pin male plug of the power cord to an electrical outlet.
Figure 2.4 Connecting the power cord
Warning! The POC-W243L is supplied by a 84 watt power supply and a special
adapter as depicted above.
If a medical adaptor is connected to the POC-W243L, the customer
must ensure legal and regulatory compliance and that the device meets
the laws and standards compliance requirements of this hardware.