Advantech PCM-9590 User Manual Download Page 43

Page: 43 / 80

PCM-9590 User Manual

Chapter 3 BIOS Operation

PCI VGA Palette Snoop [Disabled]

The item is designed to solve problems caused by some non-standard VGA
cards. A built-in VGA system does not need this function.

INT Pin 1~8 Assignment

[

Auto

]

The interrupt request (IRQ) line assigned to a device connected to the PCI inter-
face on your system.

3.2.8

PC Health Status

Shutdown Temperature [Disabled]

This item enables users to set the limitation of CPU temperature, the range is
from 85°C through 100°C.

Current System/CPU Temp [Show Only]

This item displays current system and CPU temperature.

FAN 1 / FAN2 / FAN3 / FAN4 Speed [Show Only]

This item displays current system FAN speed.

2.5V / 3.3V / 5V / 12V and VCore [Show Only]

This item displays current CPU and system Voltage.

Note!

This “PC Health Status” option controls the Thermal, FAN and Voltage
status of the board. this page is developed by Chipset independent.

Summary of Contents for PCM-9590

















































































Search results

Summary of Contents for PCM-9590

Reviews:

Brands by name

Popular brands

Advantech PCM-9590, User Manual

Search results

Summary of Contents for PCM-9590

Reviews:

Brands by name

Popular brands