manualshive.com logo in svg

Advantech PCM-9590, User Manual

Share
Download
Advantech PCM-9590 User Manual Download Page 4

PCM-9590 User Manual

iv

expense. The user is advised that any equipment changes or modifications not
expressly approved by the party responsible for compliance would void the compli-
ance to FCC regulations and therefore, the user’s authority to operate the

equipment.

Warnings, Cautions and Notes

Technical Support and Assistance

For more information about this and other Advantech products, please visit our web-
site at:

http://www.advantech.com/ 

http://www.advantech.com/ePlatform/

For technical support and service, please visit our support website at:

http://support.advantech.com.tw/support/

Additional Information and Assistance

1.

Visit the Advantech web site at http://www.advantech.com/ where you can find 
the latest product information.

2.

Contact your distributor, sales representative, or Advantech°Øs customer ser-
vice center for technical support if you need additional assistance.  Please have 
the following information ready before you call: 

„

Product name and serial number

„

Description of your peripheral attachments

„

Description of your software (operating system, version, application software, 
etc.)

„

A complete description of the problem

„

The exact wording of any error messages

Warning! There is a danger of a new battery exploding if it is incorrectly installed. 

Do not attempt to recharge, force open, or heat the battery. Replace the 
battery only with the same or equivalent type recommended by the man-
ufacturer. Discard used batteries according to the manufacturer’s 
instructions.

Part No. 2006959010

Edition 1

Sep 2007

Summary of Contents for PCM-9590

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands