Advantech PCM-9343 User Manual Download

Page: 28 / 74

PCM-9343 User Manual

Chapter 3

IOS Operation

3.2.3

Advanced BIOS Features



Hard Disk Boot Priority [Press Enter]

This item allows user to choose the bootable Hard Drive.



USB Boot Priority [Press Enter]

This item allows user to choose the bootable USB device.



First / Second / Third / Other Boot Drive



Fast Boot [Disabled]

This item enable/disable Fast Boot feature.



Blank Boot [Disabled]

This item enable/disable Blank Boot feature.



Boot Safe [Disabled]

This item enable/disable Boot Safe function as a “A” drive.



Console Redirection [Disabled]

This item allows a user to enable / disable console redirection mode.

Floppy

Select boot device priority by Floppy.

Hard Disk

Select boot device priority by Hard Disk.

CDROM

Select boot device priority by CDROM.

USB-Device

Select boot device priority by USB-Device.

USB-FDD

Select boot device priority by USB-FDD.

USB-ZIP

Select boot device priority by USB-ZIP.

USB-CDROM

Select boot device priority by USB-CDROM.

LAN

Select boot device priority by LAN.

Disabled

Disable this boot function.

Note!

When select LAN(Realtek LAN) boot please also disabled ”BIOS USB
2.0 Controller” in BIOS.

Summary of Contents for PCM-9343











































































Search results

Summary of Contents for PCM-9343

Reviews:

Related manuals for PCM-9343

Brands by name

Popular brands

Advantech PCM-9343, User Manual

Search results

Summary of Contents for PCM-9343

Reviews:

Related manuals for PCM-9343

Brands by name

Popular brands