background image

19

PCM-9343 User Manual

Chapter 3

B

IOS Operation

3.2.1

Main Menu

Press the <Del> key during startup to enter the BIOS CMOS Setup Utility; the Main
Menu will appear on the screen. Use arrow keys to highlight the desired item, and
press <Enter> to accept, or enter the sub-menu. 

Standard CMOS Features

This setup page includes all the features for standard CMOS configuration.

Advanced BIOS Features

This setup page includes all the features for advanced BIOS configuration.

Advanced Chipset Features

This setup page includes all the features for advanced chipset configuration.

Integrated Peripherals

This setup page includes all onboard peripheral devices.

PnP/PCI Configurations 

This setup page includes PnP OS and PCI device configuration.

Load Optimized Defaults

This selection loads optimized values for best system performance configura-
tion.

Set Password

Establish, change or disable passwords. 

Save & Exit Setup

Save CMOS value settings to CMOS and exit BIOS setup.

Exit Without Saving

Abandon all CMOS value changes and exit BIOS setup.

Summary of Contents for PCM-9343











































































Reviews: