Additional Technical Manual
A26361-D1085-Z180-2-7619
Page 1
Introduction
This technical manual applies for the mainboard D1085. This system board is available in different
configuration levels. Depending on the hardware configuration of your device, it may be that you
cannot find several options in your version of the system board, even though they are described.
Further information e. g. the complete Technical Manual for the D1085 and the Reference Manual
for the BIOS Setup are provided on the "Drivers & Utility" CD. For detailed information please
look at chapter 3.
1
Features
Function
Version
Version
D1085-A
D1085-E
Processor
Intel Pentium
II,
233 - 333 MHz
Intel Celeron
Intel Pentium
II,
233 - 333 MHz
Intel Celeron
Chipset
Intel 440LX
Intel 440EX
AGP connector
X
X
Wake on LAN (WOL) connector
X
-
USB
X
X
IrDA connector
X
-
Chipcard reader
X
-
Keyboard on
X
-
BIOS Fax
-
-
Quiet Boot
X
X
DMI
X
X
Systemmonitoring
X
-
DIMM
3
2
Memory ECC Support
X
-
FAX On
-
-
PCI Slots*
4
4
ISA Slots*
3
3
* = 1 PCI/ISA slot is shared
2
Mechanics
!
Computer mainboards and components contain very delicate IC chips. To protect
them against damage caused from electric static, you have to follow some
precautions:
•
Unplug your computer when you work inside.
•
Hold components by the edge, don’t touch their leads.
•
Use a grounded wrist strap.
Place the mainboard and the components on a grounded antistatic pad whenever
you work outside the computer.
Once you have installed the system board, you should remove the battery
protection (i.e. the thin plastic plate between battery and contact spring).
