manualshive.com logo in svg

Advantech PCM-4386, User Manual, Page: 43 / 110

Share
Download
Advantech PCM-4386 User Manual Download Page 43

31

Chapter 4  

4.5  Integrated Peripherals

4.5.1 IDE Master/Slave PIO/UDMA Mode,

IDE Primary (Secondary) Master/Slave PIO/UDMA Mode (Auto) Each 
channel (Primary and Secondary) has both a master and a slave, making 
four IDE devices possible. Because each IDE device may have a different 
Mode timing (0, 1, 2, 3, 4), it is necessary for these to be independent. 
The default setting “Auto” will allow autodetection to ensure optimal per-
formance.

4.5.2 On-Chip Secondary PCI IDE

If you enable IDE HDD Block Mode, the enhanced IDE driver will be 
enabled. Leave IDE HDD Block Mode on the default setting. 

4.5.3 USB Controller

Select Enabled if your system contains a Universal Serial Bus (USB) con-
troller and you have USB peripherals. The choices: Enabled, Disabled.

4.5.4 USB Keyboard/Mouse Support

Select Enabled if user plan to use an USB keyboard. The choice: Enabled, 
Disable.

Figure 4.4: Integrated peripherals

Summary of Contents for PCM-4386















































































































Reviews:

No comments